Hi,
I Have got irplus file to Genius sw 5.1 . But i am not ale to convert to Ir flipper zero file.
Could you please help me?
"
1318 359 1317 369 480 1206 472 1215 1324 363 475 1213 1347 339 478 1208 471 1215 473 1213 475 1210 478
1310 365 1292 395 475 1213 475 1212 1316 370 479 1207 473 1213 1326 361 477 1210 479 1207 471 1216 473
1306 372 1316 370 480 1207 1321 366 475 1212 477 1209 480 1207 1320 366 473 1214 475 1211 477 1209 480
1342 336 1321 365 473 1213 1326 361 477 1211 477 1208 1320 367 471 1215 475 1211 478 1208 482 1204 484
"
Or convert From this :
SW_5_1_HT.txt (994 Bytes)
this config file was automatically generated
using lirc-0.6.5(any) on Fri Apr 1 21:47:32 2005
contributed by Nickolay Kondrashov
brand: Genius
model no. of remote control: UNKNOWN
devices being controlled by this remote:
Genius SW-5.1 Home Theater (5.1 speakers)
( see: http://www.geniusnet.com.tw/product/product-1.asp?pdtno=162 )
begin remote
name GENIUS_SW_5_1_HT
bits 8
flags SPACE_ENC|CONST_LENGTH
eps 30
aeps 100
one 1202 484
zero 359 1327
ptrail 359
pre_data_bits 3
pre_data 0x6
gap 53977
toggle_bit 0
begin codes
KEY_POWER 0x50 # Was: POWER
KEY_MUTE 0x48 # Was: MUTE
KEY_VOLUMEDOWN 0x88 # Was: VOL_DOWN
KEY_VOLUMEUP 0x90 # Was: VOL_UP
end codes
end remote