[APP] qFlipper version 1.0.1 commit beb47b7f 2022-04-06T06:16:06
[APP] OS info: Windows 10 Version 1809 10 10.0.17763
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Registering the device
[BKD] Current device changed to "Inbas"
[UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[DEV] Full Repair @Inbas START
[ZIP] Uncompressing file with size of 168696 bytes...
[ZIP] Uncompression finished : No Error
[ZIP] Uncompressing file with size of 26143 bytes...
[ZIP] Uncompression finished : No Error
[RCY] Set Recovery boot mode @Inbas START
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] An error has occured during download phase
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[RCY] Set Recovery boot mode @Inbas ERROR: Failed to set Recovery mode: operation timeout
[DEV] Full Repair @Inbas ERROR: Failed to set Recovery mode: operation timeout
[BKD] Current operation finished with error: "Failed to set Recovery mode: operation timeout"
[UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[BKD] Finalized current operation
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[DEV] Full Repair @Inbas START
[ZIP] Uncompressing file with size of 168696 bytes...
[ZIP] Uncompression finished : No Error
[ZIP] Uncompressing file with size of 26143 bytes...
[ZIP] Uncompression finished : No Error
[RCY] Set Recovery boot mode @Inbas START
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] An error has occured during download phase
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[RCY] Set Recovery boot mode @Inbas ERROR: Failed to set Recovery mode: operation timeout
[DEV] Full Repair @Inbas ERROR: Failed to set Recovery mode: operation timeout
[BKD] Current operation finished with error: "Failed to set Recovery mode: operation timeout"
[BKD] Finalized current operation
[REG] Removed offline device: Inbas
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Registering the device
[BKD] Current device changed to "Inbas"
[UPD] Fetched update information from https://update.flipperzero.one/firmware/directory.json
[DEV] Full Repair @Inbas START
[ZIP] Uncompressing file with size of 168696 bytes...
[ZIP] Uncompression finished : No Error
[ZIP] Uncompressing file with size of 26143 bytes...
[ZIP] Uncompression finished : No Error
[RCY] Set Recovery boot mode @Inbas START
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] An error has occured during download phase
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[RCY] Set Recovery boot mode @Inbas SUCCESS
[RCY] Co-Processor Firmware Download @Inbas START
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] FUS appears NOT to be running: Error occured, Not running.
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Failed to perform control transfer
[DBG] Bytes uploaded: 0 0%
[DBG] End of transmission.
[DBG] Upload has finished.
[DBG] Failed to read FUS status
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Device is not idle, resetting...
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[REG] Device went offline: VID_0x483:PID_0xdf11
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Idle, No error.
[DBG] Attempting to flash CO-PROCESSOR firmware image...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] SFSA value is 0xf4
[DBG] Target address for co-processor firmware image is 0x80d7000
[DBG] Device is not idle, resetting...
[DBG] Erasing memory: 0%
[DBG] Erasing memory: 3%
[DBG] Erasing memory: 6%
[DBG] Erasing memory: 10%
[DBG] Erasing memory: 13%
[DBG] Erasing memory: 17%
[DBG] Erasing memory: 20%
[DBG] Erasing memory: 24%
[DBG] Erasing memory: 27%
[DBG] Erasing memory: 31%
[DBG] Erasing memory: 34%
[DBG] Erasing memory: 37%
[DBG] Erasing memory: 41%
[DBG] Erasing memory: 44%
[DBG] Erasing memory: 48%
[DBG] Erasing memory: 51%
[DBG] Erasing memory: 55%
[DBG] Erasing memory: 58%
[DBG] Erasing memory: 62%
[DBG] Erasing memory: 65%
[DBG] Erasing memory: 69%
[DBG] Erasing memory: 72%
[DBG] Erasing memory: 75%
[DBG] Erasing memory: 79%
[DBG] Erasing memory: 82%
[DBG] Erasing memory: 86%
[DBG] Erasing memory: 89%
[DBG] Erasing memory: 93%
[DBG] Erasing memory: 96%
[DBG] Erase done.
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes downloaded: 1024 0%
[DBG] Bytes downloaded: 2048 1%
[DBG] Bytes downloaded: 3072 2%
[DBG] Bytes downloaded: 4096 3%
[DBG] Bytes downloaded: 5120 4%
[DBG] Bytes downloaded: 6144 5%
[DBG] Bytes downloaded: 7168 6%
[DBG] Bytes downloaded: 9216 7%
[DBG] Bytes downloaded: 10240 8%
[DBG] Bytes downloaded: 11264 9%
[DBG] Bytes downloaded: 12288 10%
[DBG] Bytes downloaded: 13312 11%
[DBG] Bytes downloaded: 14336 12%
[DBG] Bytes downloaded: 16384 13%
[DBG] Bytes downloaded: 17408 14%
[DBG] Bytes downloaded: 18432 15%
[DBG] Bytes downloaded: 19456 16%
[DBG] Bytes downloaded: 20480 17%
[DBG] Bytes downloaded: 21504 18%
[DBG] Bytes downloaded: 23552 19%
[DBG] Bytes downloaded: 24576 20%
[DBG] Bytes downloaded: 25600 21%
[DBG] Bytes downloaded: 26624 22%
[DBG] Bytes downloaded: 27648 23%
[DBG] Bytes downloaded: 28672 24%
[DBG] Bytes downloaded: 29696 25%
[DBG] Bytes downloaded: 31744 26%
[DBG] Bytes downloaded: 32768 27%
[DBG] Bytes downloaded: 33792 28%
[DBG] Bytes downloaded: 34816 29%
[DBG] Bytes downloaded: 35840 30%
[DBG] Bytes downloaded: 36864 31%
[DBG] Bytes downloaded: 38912 32%
[DBG] Bytes downloaded: 39936 33%
[DBG] Bytes downloaded: 40960 34%
[DBG] Bytes downloaded: 41984 35%
[DBG] Bytes downloaded: 43008 36%
[DBG] Bytes downloaded: 44032 37%
[DBG] Bytes downloaded: 46080 38%
[DBG] Bytes downloaded: 47104 39%
[DBG] Bytes downloaded: 48128 40%
[DBG] Bytes downloaded: 49152 41%
[DBG] Bytes downloaded: 50176 42%
[DBG] Bytes downloaded: 51200 43%
[DBG] Bytes downloaded: 52224 44%
[DBG] Bytes downloaded: 54272 45%
[DBG] Bytes downloaded: 55296 46%
[DBG] Bytes downloaded: 56320 47%
[DBG] Bytes downloaded: 57344 48%
[DBG] Bytes downloaded: 58368 49%
[DBG] Bytes downloaded: 59392 50%
[DBG] Bytes downloaded: 61440 51%
[DBG] Bytes downloaded: 62464 52%
[DBG] Bytes downloaded: 63488 53%
[DBG] Bytes downloaded: 64512 54%
[DBG] Bytes downloaded: 65536 55%
[DBG] Bytes downloaded: 66560 56%
[DBG] Bytes downloaded: 68608 57%
[DBG] Bytes downloaded: 69632 58%
[DBG] Bytes downloaded: 70656 59%
[DBG] Bytes downloaded: 71680 60%
[DBG] Bytes downloaded: 72704 61%
[DBG] Bytes downloaded: 73728 62%
[DBG] Bytes downloaded: 75776 63%
[DBG] Bytes downloaded: 76800 64%
[DBG] Bytes downloaded: 77824 65%
[DBG] Bytes downloaded: 78848 66%
[DBG] Bytes downloaded: 79872 67%
[DBG] Bytes downloaded: 80896 68%
[DBG] Bytes downloaded: 81920 69%
[DBG] Bytes downloaded: 83968 70%
[DBG] Bytes downloaded: 84992 71%
[DBG] Bytes downloaded: 86016 72%
[DBG] Bytes downloaded: 87040 73%
[DBG] Bytes downloaded: 88064 74%
[DBG] Bytes downloaded: 89088 75%
[DBG] Bytes downloaded: 91136 76%
[DBG] Bytes downloaded: 92160 77%
[DBG] Bytes downloaded: 93184 78%
[DBG] Bytes downloaded: 94208 79%
[DBG] Bytes downloaded: 95232 80%
[DBG] Bytes downloaded: 96256 81%
[DBG] Bytes downloaded: 98304 82%
[DBG] Bytes downloaded: 99328 83%
[DBG] Bytes downloaded: 100352 84%
[DBG] Bytes downloaded: 101376 85%
[DBG] Bytes downloaded: 102400 86%
[DBG] Bytes downloaded: 103424 87%
[DBG] Bytes downloaded: 104448 88%
[DBG] Bytes downloaded: 106496 89%
[DBG] Bytes downloaded: 107520 90%
[DBG] Bytes downloaded: 108544 91%
[DBG] Bytes downloaded: 109568 92%
[DBG] Bytes downloaded: 110592 93%
[DBG] Bytes downloaded: 111616 94%
[DBG] Bytes downloaded: 113664 95%
[DBG] Bytes downloaded: 114688 96%
[DBG] Bytes downloaded: 115712 97%
[DBG] Bytes downloaded: 116736 98%
[DBG] Bytes downloaded: 117760 99%
[DBG] Bytes downloaded: 118688 100%
[DBG] Download has finished.
[DBG] Sending FW_UPGRADE command...
[DBG] Device is not idle, resetting...
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] Device is in error state, resetting...
[DBG] Failed to perform control transfer
[DBG] Failed to clear device status
[DBG] Failed to prepare the device
[DBG] Failed to read FUS status
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[REG] Device went offline: VID_0x483:PID_0xdf11
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Firmware upgrade ongoing, Erase error.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Idle, No error.
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 4 100%
[DBG] Upload has finished.
[DBG] Reading 56 bytes from address 0x20030024
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 56 100%
[DBG] Upload has finished.
[DBG] FUS version: 0.0.16
[DBG] Wireless Stack version: 0.0.0
[RCY] Wireless stack installation seems to have failed, retrying...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] FUS is already RUNNING, rebooting for consistency...
[DBG] Device is not idle, resetting...
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[RCY] Timeout with an online device, assuming it is still functional
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[REG] Device went offline: VID_0x483:PID_0xdf11
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Idle, No error.
[DBG] Attempting to flash CO-PROCESSOR firmware image...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 128 100%
[DBG] Upload has finished.
[DBG] SFSA value is 0xf4
[DBG] Target address for co-processor firmware image is 0x80d7000
[DBG] Device is not idle, resetting...
[DBG] Erasing memory: 0%
[DBG] Erasing memory: 3%
[DBG] Erasing memory: 6%
[DBG] Erasing memory: 10%
[DBG] Erasing memory: 13%
[DBG] Erasing memory: 17%
[DBG] Erasing memory: 20%
[DBG] Erasing memory: 24%
[DBG] Erasing memory: 27%
[DBG] Erasing memory: 31%
[DBG] Erasing memory: 34%
[DBG] Erasing memory: 37%
[DBG] Erasing memory: 41%
[DBG] Erasing memory: 44%
[DBG] Erasing memory: 48%
[DBG] Erasing memory: 51%
[DBG] Erasing memory: 55%
[DBG] Erasing memory: 58%
[DBG] Erasing memory: 62%
[DBG] Erasing memory: 65%
[DBG] Erasing memory: 69%
[DBG] Erasing memory: 72%
[DBG] Erasing memory: 75%
[DBG] Erasing memory: 79%
[DBG] Erasing memory: 82%
[DBG] Erasing memory: 86%
[DBG] Erasing memory: 89%
[DBG] Erasing memory: 93%
[DBG] Erasing memory: 96%
[DBG] Erase done.
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes downloaded: 1024 0%
[DBG] Bytes downloaded: 2048 1%
[DBG] Bytes downloaded: 3072 2%
[DBG] Bytes downloaded: 4096 3%
[DBG] Bytes downloaded: 5120 4%
[DBG] Bytes downloaded: 6144 5%
[DBG] Bytes downloaded: 7168 6%
[DBG] Bytes downloaded: 9216 7%
[DBG] Bytes downloaded: 10240 8%
[DBG] Bytes downloaded: 11264 9%
[DBG] Bytes downloaded: 12288 10%
[DBG] Bytes downloaded: 13312 11%
[DBG] Bytes downloaded: 14336 12%
[DBG] Bytes downloaded: 16384 13%
[DBG] Bytes downloaded: 17408 14%
[DBG] Bytes downloaded: 18432 15%
[DBG] Bytes downloaded: 19456 16%
[DBG] Bytes downloaded: 20480 17%
[DBG] Bytes downloaded: 21504 18%
[DBG] Bytes downloaded: 23552 19%
[DBG] Bytes downloaded: 24576 20%
[DBG] Bytes downloaded: 25600 21%
[DBG] Bytes downloaded: 26624 22%
[DBG] Bytes downloaded: 27648 23%
[DBG] Bytes downloaded: 28672 24%
[DBG] Bytes downloaded: 29696 25%
[DBG] Bytes downloaded: 31744 26%
[DBG] Bytes downloaded: 32768 27%
[DBG] Bytes downloaded: 33792 28%
[DBG] Bytes downloaded: 34816 29%
[DBG] Bytes downloaded: 35840 30%
[DBG] Bytes downloaded: 36864 31%
[DBG] Bytes downloaded: 38912 32%
[DBG] Bytes downloaded: 39936 33%
[DBG] Bytes downloaded: 40960 34%
[DBG] Bytes downloaded: 41984 35%
[DBG] Bytes downloaded: 43008 36%
[DBG] Bytes downloaded: 44032 37%
[DBG] Bytes downloaded: 46080 38%
[DBG] Bytes downloaded: 47104 39%
[DBG] Bytes downloaded: 48128 40%
[DBG] Bytes downloaded: 49152 41%
[DBG] Bytes downloaded: 50176 42%
[DBG] Bytes downloaded: 51200 43%
[DBG] Bytes downloaded: 52224 44%
[DBG] Bytes downloaded: 54272 45%
[DBG] Bytes downloaded: 55296 46%
[DBG] Bytes downloaded: 56320 47%
[DBG] Bytes downloaded: 57344 48%
[DBG] Bytes downloaded: 58368 49%
[DBG] Bytes downloaded: 59392 50%
[DBG] Bytes downloaded: 61440 51%
[DBG] Bytes downloaded: 62464 52%
[DBG] Bytes downloaded: 63488 53%
[DBG] Bytes downloaded: 64512 54%
[DBG] Bytes downloaded: 65536 55%
[DBG] Bytes downloaded: 66560 56%
[DBG] Bytes downloaded: 68608 57%
[DBG] Bytes downloaded: 69632 58%
[DBG] Bytes downloaded: 70656 59%
[DBG] Bytes downloaded: 71680 60%
[DBG] Bytes downloaded: 72704 61%
[DBG] Bytes downloaded: 73728 62%
[DBG] Bytes downloaded: 75776 63%
[DBG] Bytes downloaded: 76800 64%
[DBG] Bytes downloaded: 77824 65%
[DBG] Bytes downloaded: 78848 66%
[DBG] Bytes downloaded: 79872 67%
[DBG] Bytes downloaded: 80896 68%
[DBG] Bytes downloaded: 81920 69%
[DBG] Bytes downloaded: 83968 70%
[DBG] Bytes downloaded: 84992 71%
[DBG] Bytes downloaded: 86016 72%
[UPD] Fetched update information from https://update.flipperzero.one/qFlipper/directory.json
[DBG] Bytes downloaded: 87040 73%
[DBG] Bytes downloaded: 88064 74%
[DBG] Bytes downloaded: 89088 75%
[DBG] Bytes downloaded: 91136 76%
[DBG] Bytes downloaded: 92160 77%
[DBG] Bytes downloaded: 93184 78%
[DBG] Bytes downloaded: 94208 79%
[DBG] Bytes downloaded: 95232 80%
[DBG] Bytes downloaded: 96256 81%
[DBG] Bytes downloaded: 98304 82%
[DBG] Bytes downloaded: 99328 83%
[DBG] Bytes downloaded: 100352 84%
[DBG] Bytes downloaded: 101376 85%
[DBG] Bytes downloaded: 102400 86%
[DBG] Bytes downloaded: 103424 87%
[DBG] Bytes downloaded: 104448 88%
[DBG] Bytes downloaded: 106496 89%
[DBG] Bytes downloaded: 107520 90%
[DBG] Bytes downloaded: 108544 91%
[DBG] Bytes downloaded: 109568 92%
[DBG] Bytes downloaded: 110592 93%
[DBG] Bytes downloaded: 111616 94%
[DBG] Bytes downloaded: 113664 95%
[DBG] Bytes downloaded: 114688 96%
[DBG] Bytes downloaded: 115712 97%
[DBG] Bytes downloaded: 116736 98%
[DBG] Bytes downloaded: 117760 99%
[DBG] Bytes downloaded: 118688 100%
[DBG] Download has finished.
[DBG] Sending FW_UPGRADE command...
[DBG] Device is not idle, resetting...
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] Device is in error state, resetting...
[DBG] Failed to perform control transfer
[DBG] Failed to clear device status
[DBG] Failed to prepare the device
[DBG] Failed to read FUS status
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[REG] Device went offline: VID_0x483:PID_0xdf11
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Firmware upgrade ongoing, Write error.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Idle, No error.
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 4 100%
[DBG] Upload has finished.
[DBG] Reading 56 bytes from address 0x20030024
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 56 100%
[DBG] Upload has finished.
[DBG] FUS version: 0.0.16
[DBG] Wireless Stack version: 0.0.0
[RCY] Wireless stack installation seems to have failed, retrying...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] FUS is already RUNNING, rebooting for consistency...
[DBG] Device is not idle, resetting...
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] Failed to perform control transfer
[DBG] Unable to get device status
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[DBG] vvv ATTENTION: Ignore errors below until matching closing message. vvv
[DBG] ^^^ ATTENTION: Ignore errors above until matching opening message. ^^^
[REG] Device went offline: VID_0x483:PID_0xdf11
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Device is not idle, resetting...
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to open file for USB device
[DBG] Failed to get FUS status. This is normal if the device has just rebooted.
[REG] Device went offline: VID_0x483:PID_0xdf11
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Failed to get FUS status. The device is offline at the moment.
[REG] Detected new device: VID_0x483:PID_0xdf11
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 32 100%
[DBG] Upload has finished.
[REG] Device went back online
[DBG] Getting Co-Processor (Wireless) status...
[DBG] Device is not idle, resetting...
[DBG] Device reported transfer size: 1024
[DBG] Bytes uploaded: 2 100%
[DBG] Upload has finished.
[DBG] Current FUS state: Idle, No error.
[DBG] Sending FW_UPGRADE command...
[DBG] Device is not idle, resetting...
[DBG] Attempting to flash CO-PROCESSOR firmware image...
[DBG] Failed to open file for USB device
[RCY] Co-Processor Firmware Download @Inbas ERROR: Failed to download the Wireless Stack.
[DEV] Full Repair @Inbas ERROR: Failed to download the Wireless Stack.
[BKD] Current operation finished with error: "Failed to download the Wireless Stack."