Convert kitchen extractor codes (Hob2Hood) to use with flipper

ld808 · July 6, 2022, 4:44pm

Hi all

Got my flipper today and one thing I’ve always wanted to know is, does my kitchen extractor have IR control, it seems to have an IR window and you can get hobs to talk to it.

Anyhow I found this link

Which list the codes in this format

&\u0000\u0014\u0000\u0018\u0016\u0019-1\u0016\u0018\u0017\u0018-1D\u0019-\u0018\u00170\u0000\r\u0005\u0000\u0000\u0000\u0000

Anyone know how I can convert that to a .ir file for the flipper?

Cheers
Lee

ld808 · July 6, 2022, 5:23pm

Another format of codes are here

github.com

tuxedo0801/Arduino-Hob2Hood/blob/dd49e276af1daf824b515881fa42f53bf2a14624/Hob2Hood.ino

#include <IRremote.h>

/*
Siehe: http://knx-user-forum.de/forum/%C3%B6ffentlicher-bereich/knx-eib-forum/diy-do-it-yourself/37790-hob2hood-ir-protokoll-arduino/page2
Lüftung Stufe1 0xE3C01BE2
Lüftung Stufe2 0xD051C301
Lüftung Stufe3 0xC22FFFD7
Lüftung Stufe4 0xB9121B29
Lüftung Aus 0x55303A3
Licht An 0xE208293C
Licht Aus 0x24ACF947
*/

// IR commands from AEG hob2hood device
const long IRCMD_VENT_1 = 0xE3C01BE2;
const long IRCMD_VENT_2 = 0xD051C301;
const long IRCMD_VENT_3 = 0xC22FFFD7;
const long IRCMD_VENT_4 = 0xB9121B29;
const long IRCMD_VENT_OFF = 0x55303A3;
const long IRCMD_LIGHT_ON = 0xE208293C;

This file has been truncated. show original

Still not sure how to get them into this format

protocol: 
address: 
command:

ld808 · July 7, 2022, 1:27pm

Just in case anyone ends up here, I’ve found the info and have a PR